An angle grinder is a handheld power tool that’s used for multiple purposes like grinding, cutting, polishing etc. If you work at a metal workshop or a DIY enthusiast then an angle grinder will hands down be your best friend.
It’s a super versatile tool that can perform various tasks. However, you need to use a different disk to perform a different task. The disk will vary from application to application depending on the task type. An angle grinder has multiple uses for various tasks. Let’s take a look at how to use an angle grinder to make your tasks a lot easier and hassle-free.
Useage of an Angle Grinder
Create a Safe Work Environment
Before you move on to the actual work, make sure the work environment is safe and secured. Since the angle grinder is a power tool, it’s essential that the surrounding is safe because if you accidentally fall then you can face horrendous injuries in a fraction of a second.
If you have tool boxes, tools, wires or cables lying around the work station then clean them immediately to avoid any unwanted situation.
Wear Safety Guards
Nothing is more important than your safety so make sure you wear high-quality safety goggles to keep the eyes protected for flying debris and sparks. You can also wear a helmet or a full face visor to keep your face protected from these fragments.
It’s also essential to wear gloves so that heat or waste materials don’t damage your skin. The thick gloves will also protect the hand from minor cuts or abrasions. Make sure you wear earplugs to put less strain on your ears from the screechy noises.
Position the Grinder
Now that you’ve taken care of the safety features, let’s move onto positioning the grinder. It’s vital to position the grinder properly to lower the risk factors as they remove a lot of material quickly. A good position will ensure that the spark or waste materials fly away from you.
Use the flat part of the wheel if you’re opting for surface grinding and keep a 20° to 30 ° angle between your work surface and the tool. On the other hand, for sanding application maintain a 5°-10° angle from the tool to the work surface.
Choose the Correct Disk
No matter how good the grinder is, if you try to get the work done with the wrong disk then you’ll eventually end up with a sloppy result. It’s a must that you mount the right kind of disk to cut your desired material.
Before mounting the disk, check it thoroughly for any defects or cracks to minimize the risks of potential hazard it may cause. A defective disk may incur in fatal consequences as well.
Also, make sure that you equip the correct disk for the application you’re going to do. Unlike grind disks, cutting disks aren’t designed to withstand side pressure. So, if you equip a cutting grind disk to grind then it’ll eventually shatter and through the debris all around at a very high speed.
Choose the Right RPM
The RPM (revolution per minute) is notified on every disk for so it’s vital that you don’t rotate them in higher speed than they are designed for. The disk size and the speed are inversely proportional, which means the larger the size of the disk, the lesser the speed.
Some Pro Tips for You
- Keep the tool in a moving motion for grinding and sanding as that will help you attain a much smoother and professional result.
- Make sure whenever you plug the cord or put in the battery the power switch is off on the tool, otherwise, the sudden jump start can cause serious damages.
- Before putting down the grinder to the surface make sure that it has absolutely stopped rotating. A slight spin can have damaging effects on your work as well as yourself.
- One thing you absolutely shouldn’t do while using an angle grinder is to hold the material on your hand to cut.
- Make sure the grinder has reached its full speed to ensure smoother consistency and better finish
Angler grinder is one of the most necessary tools in every workshop and its versatility is what makes it so awesome. An angle grinder can be used on concrete, plastic, tiles, metals and numerous other materials. From grinding to cutting it can perform numerous tasks with ease.
Bear in mind that it’s extremely dangerous and you should definitely handle it with care otherwise fatal accidents can happen within a fraction of a second. Take proper precautionary measures such as proper goggles and hand gloves to minimize the risk factors.
Operating the angle grinder may seem overwhelming if you’re a beginner but once you get the grasp of it, the amazing things it can do will awestruck you. It’s a must have power too for workshops and DIYs. Make sure you are careful while operating the device as it rotates with super high speed.
I hope after reading this article (how to use an angle grinder) you feel more confident to tackle using this tool, especially if you’re a newbie! 🙂